Silhouette FWD V6-3.4L VIN E (2004)
27.
Install the engine mount struts.
28.
Install the throttle body air inlet duct.
29.
Install the engine mount struts.
30.
Install the wiper cover.
Notice:
Do NOT overfill the transaxle. The overfilling of the transaxle causes foaming, loss of fluid, shift complaints, and possible damage to the
transaxle.
31.
Adjust the fluid level. Refer to the following information.
-
Line Pressure Check Procedure
-
Fluid and Lubricant Recommendations in Maintenance and Lubrication
-
Capacities - Approximate Fluid in Maintenance and Lubrication
34.
Inspect for proper completion of the repairs.
35.
Inspect for fluid leaks.
Disclaimer
