Silhouette FWD V6-3.4L VIN E (2004)
Transmission Mount: Service and Repair
Automatic Transmission Mount Bracket Replacement
Automatic Transmission Mount Bracket Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the left front tire and wheel. Refer to Tire and Wheel Removal and Installation.
3. Remove the left engine splash shield. Refer to Splash Shield Replacement - Engine.
4. Use a utility stand with a block of wood in order to support the transaxle.
5. Remove the transaxle mount upper nuts.
6. Remove the transaxle mount bracket bolts.
7. Remove the transaxle mount bracket.
Installation Procedure