Silhouette FWD V6-3.4L VIN E (2004)
4. Connect the rear washer hose to the washer solvent container.
5. Connect the rear washer hose end to the rear washer pump.
6. Route the rear washer hose (1) opposite end through the rear liftgate conduit.
7. Connect the rear washer hose (1) to the rear washer nozzle (2).
8. Position the rear washer nozzle to the liftgate.
9. Press in firmly to install the rear washer nozzle to the liftgate.
10. Install the wiper module cover.
11. Install the liftgate trim panel.
12. Install the rear lower quarter trim panel.
13. Install the lower pillar garnish molding.
14. Install the right cowl trim panel.
