oldsmobile Workshop Repair Guides

Oldsmobile Workshop Service and Repair Manuals

All Other Service Bulletins for Body Control Module:|86C13 > < Campaign - Low Engine Oil Pressure Warning Malfunction|Page 7315
Page 7
background image

CLAIM INFORMATION

1986 MODELS ONLY - Determine if vehicle is equipped with three terminal oil pressure switch or four terminal oil pressure sensor. If equipped with
three terminal switch, replace with four terminal sensor. (NOTE: If vehicle is equipped with four terminal sensor, sensor replacement is not required.)
Inspect sensor connector terminals for corrosion. Replace EPROM.

Failure Code

Labor Operation

Labor Hours*

96

V3940

.6

1987 MODELS ONLY - Install new EPROM.

Failure Code

Labor Operation

Labor Hours

96

V3941

.4

.1 hour clerical administration may be added to the above operation.

*Add:
To clean one or all connector terminals .1 hour To replace connector terminal(s) .1 hour each

All Other Service Bulletins for Body Control Module:|86C13 > < Campaign - Low Engine Oil Pressure Warning Malfunction|Page 7315