Toronado V6-231 3.8L (1986)
Brake Pad: Service and Repair
Shoe & Lining Removal
Fig. 2 Delco-Moraine series 3738M rear disc brake caliper exploded view
1.
Remove caliper assembly as outlined.
2.
Remove outboard shoe assembly, unsnapping springs from holes in caliper.
3.
Remove inboard shoe assembly, pressing in on edge of shoe from open side of caliper and tilting shoe outward to release it from retainer.
4.
Remove bushings from caliper mounting bracket holes, Fig. 2, and remove two-way check valve from end of piston with screwdriver. If leakage
is noted from piston hole after removing check valve, caliper must be overhauled.