Toronado V6-231 3.8L (1986)
Fig. 6 Delco-Moraine single diaphragm booster
4. Using a C-clamp, depress accumulator can, then insert a punch into hole in housing to unseat retaining ring. Remove ring from housing using a
small screwdriver.
5. Slowly back off C-clamp until tension is relieved, then remove C-clamp, retaining cap and accumulator.
6. Reverse procedure to assemble. Lubricate accumulator can seal with power steering fluid. Ensure accumulator can retaining ring is completely
seated in housing groove.
