Toronado V6-231 3.8L (1986)
FIGURE 1A
6.
Solder capacitor part number 1644291 to the back of the terminals as shown in Figure 1-A. Position capacitor leads on top of terminal so that the
capacitor is as far from the terminal as possible.
FIGURE 1B
7.
Tape capacitor leads to wires as shown in Figure 1-B. Be sure to securely wrap capacitor leads so that they are completely insulated.
FIGURE 1C
8.
Reinstall terminals into connector. See Figure 1-C.
9.
Repeat steps 5-8 for the dark green and dark blue wires. (Terminals G and H)
10.
Repeat steps 5-8 for the light green and tan wires. (Terminals D and E)
11.
Reinstall power seat.
12.
Connect power seat six-way connector to harness.
13.
Reinstall power seat trim.
