oldsmobile Workshop Repair Guides

Oldsmobile Workshop Service and Repair Manuals

Campaign - Driver Information Messages|Page 2294 > < Campaign - Low Engine Oil Pressure Warning Malfunction|Page 2289
Page 1
background image

Technical Service Bulletin # 86C13

Date: 870201

Campaign - Driver Information Messages

SUBJECT

DRIVER INFORMATION MESSAGES

NUMBER: 86-C-13

DATE:

Feb. 16, 1987

MODELS/YEARS

1986 TORONADO

SECTION: 8C

Condition

General Motors has determined that some 1986 Toronados may have been assembled with an incompletely programmed body computer module (BCM).
As a result, the information center function of the electronic instrument cluster may not be capable of displaying the following driver information
messages:
^

A/C System Problem

^

Low Refrigerant

^

Generator Problem

^

Press System Monitor To Silence Chime

^

Cruise Set At

^

Cruise Problem

^

Lighting Problem (With optional twilight sentinel only)

To correct this condition, it will be necessary to replace the EEPROM in the BCM as described in the service procedure section of this campaign
bulletin.

VEHICLES INVOLVED

Involved are certain 1986 Toronados within the following serial numbers:

Assembly Plant

Beginning

Up To And Including

Hamtramck (U)

Start of Production

GU301144

DEALER ACTION

To correct this condition, dealers are to check for the absence of certain driver information messages on involved vehicles and, if necessary, install a
replacement EEPROM. Dealers are to service all vehicles subject to this campaign at no charge to the owner, regardless of mileage, age of vehicle, or
ownership, from this time forward.

Whenever a vehicle subject to this campaign is taken into your new or used vehicle inventory, or is in your dealership for service in the future, you
should take the steps necessary to be sure the campaign correction has been made before reselling or releasing the vehicle..

Owners of vehicles recently sold from your new vehicle inventory are to be contacted by the dealer and arrangements made to make the required
modification according to instructions contained in this bulletin.

Service Procedure

A.

Inspection

1.

Raise hood and install fender covers.

Campaign - Driver Information Messages|Page 2294 > < Campaign - Low Engine Oil Pressure Warning Malfunction|Page 2289