Toronado V6-231 3.8L (1986)
Body Control Module: Service Precautions
The computer system is designed to withstand normal current draws associated with vehicle operation, however, care must be taken to avoid overloading
any of these circuits. In testing for opens or shorts, do not ground or apply voltage to any of the circuits unless instructed to do so by the diagnostic
procedures. These circuits should only be tested using the high impedance multimeter (J-34029-A) if they remain connected to one of the computers.
Power should never be removed or applied to one of the computers with the key in the "ON" position. Before removing or connecting battery cables,
fuses or connectors always turn the ignition to the "lock" position.
