Toronado V6-231 3.8L (1986)
Fig. 2 Adjusting front wheel caster
1. Loosen but do not remove, 2 of 3 top strut attaching nuts covering slotted mounting holes, Fig. 2, then remove nut over remaining oval strut
mounting hole.
2. Move washer away from oval strut mounting hole.
3. Lift front of vehicle by body to separate strut from inner wheel house.
4. Drill two 11/32 inch holes at front and rear of oval strut mounting hole, then file away excess metal.
5. Lower front of vehicle and install washer and nut.
6. Adjust caster by moving top of strut forward or rearward.
7. Torque top strut attaching nuts to 18 ft. lbs.
CAMBER ADJUSTMENT
Fig. 3 Adjusting front wheel camber
