Toronado V6-231 3.8L (1986)
FIGURE 1
6.
Retighten all engine/transaxle to cradle mount fasteners. Reconnect exhaust pipe.
At this point, the vehicle should be road tested again to determine if the torque steer condition has been corrected.
If road test indicates some torque steer still exists, shim the left hand transaxle mount (Refer to Figure 1) by 2 mm increments up to a maximum of 8 mm
using Part Number 1647076. Road Test after each increment to determine need for additional shimming. Check to ensure the left hand transaxle mount
interlock hook has a minimum clearance of 3 mm. There should be no metal to metal contact.
WARRANTY INFORMATION
For repair procedure Steps 2 through 6:
Labor Operation Number:
T5156
Labor Time:
1.2 Hours
Trouble Code:
92
For shimming left hand transaxle mount, add .3 for each 2 mm increment.
