Toronado V6-3800 3.8L (1988)
Alignment: Service and Repair
Front Wheel Alignment
Steering and vibration complaints are not always the result of improper alignment. Another possibility is tire ``lead'' due to worn or improperly
manufactured tires. ``Lead'' is the vehicles's deviation from a straight path on a level road without pressure on the steering wheel.
Before making any adjustment affecting wheel alignment, make the following checks to ensure correct alignment readings and alignment adjustments.
1. Check all tires for proper inflation pressures and ensure that all tires have approximately equal tread wear.
2. Check hub and bearing assemblies for excessive wear, correcting as necessary.
3. Check ball joints and tie rod ends. If they are excessively loose, correct before making adjustment.
4. Check run out of wheels and tires.
5. Check vehicle trim height, correcting as necessary before adjusting alignment.
6. Check strut dampers for proper operation.
7. Check control arms for loose bushings.
8. Check stabilizer bar for loose or missing parts.
Consideration must also be given to excess loads, such as tool boxes or sample cases. If these items are normally carried in the vehicle, they should
remain in the vehicle during alignment adjustments.
Consideration should be given to condition of equipment being used to adjust alignment. Be sure to follow equipment manufacturer's instructions.
Regardless of equipment being used, vehicle must be on level surface, both fore and aft and sideways.
MEASURING FRONT ALIGNMENT ANGLES
