Toronado V6-3800 3.8L (1988)
Steering Gear: All Technical Service Bulletins
P/S - Updated Kit for Rack and Pinions
SUBJECT
SPOOL VALVE SPLIT RINGS FOR USE IN
ALUMINUM HOUSING POWER STEERING RACK & PINION GEARS
ALL FRONT-WHEEL-DRIVE VEHICLES
MODELS/YEARS
EQUIPPED WITH ALUMINUM VALVE
HOUSING RACK & PINION POWER STEERING
NUMBER:
88-T-80
CORP. REF. NO.:883205
DATE:
June 1988
SECTION:
3B1
Service (split ring) Seal Kit Part Number 26010340 is now available and can be installed on all vehicles equipped with power rack and pinion steering
gears with aluminum valve housings. The service seal kit replaces the previous solid rings.
The special split rings are designed to expand into the seal wear grooves which may exist in the rack and pinion housing and seat against the bottom of
the grooves. This will ensure power steering assist when cold.