oldsmobile Workshop Repair Guides

Oldsmobile Workshop Service and Repair Manuals

Recall - Catalytic Converter Replacement|Page 1768 > < Dual Bed Catalyst - Change Procedures
Page 1
background image

Technical Service Bulletin # 82E3

Date: 841001

Recall - Catalytic Converter Replacement

SUBJECT

RESTRICTED CATALYTIC CONVERTER

NUMBER: 82-E-3

DATE:

Oct. 5, 1984

MODELS/YEARS

1981 & 1982 4.3L & 5.0L V-8 GASOLINE ENGINES

SECTION: 6F

(VIN CODES F, 8 & Y)

Condition, Vehicles & Dealer Information

CONDITION

General Motors has determined that some 1981 and 1982 Oldsmobile Toronado, Ninety-Eight, Delta 88, Custom Cruiser and Cutlass Supreme models
equipped with a 4.3L or 5.0L V-8 gasoline engine may develop a restricted exhaust due to the catalytic converter becoming plugged.

VEHICLES INVOLVED

Involved are ALL 1981 and 1982 Toronado, Ninety-Eight, Delta 88, Custom Cruiser, and Cutlass Supreme models equipped with a 4.3L or 5.0L V-8
gasoline engine (VIN Codes F, 8 and Y).

Vehicles that have had the catalytic converter replaced since approximately June 1, 1983 with the new type basketed converter assembly or that have had
the converter kit part number listed in this bulletin and in Dealer Technical Bulletin 82-T-27 installed, need not have this campaign performed.

DEALER ACTION

To correct this condition on vehicles involved the catalytic converter will require replacement.

Dealers are to service all vehicles subject to this campaign at no charge to the owner, regardless of mileage, age of vehicle, or ownership, from this time
forward.

Whenever a vehicle subject to this campaign is taken into your new or used vehicle inventory, or it is in your dealership for service in the future, you
should take the steps necessary to be sure the campaign correction has been made before reselling or releasing the vehicle.

Owners of vehicles recently sold from your new vehicle inventory are to be contacted by the dealer, and arrangements made to make the required
modification according to instructions contained in this bulletin.

Service, Parts & Warranty Information

SERVICE PROCEDURE

1.

Install seat and fender covers and raise the vehicle on a hoist.

Inspection:

The converter need not be replaced:

^

If it is one of the new type basketed converter assemblies, part number 25056620 25056622; or

^

If it is one of the converters used in Dealer Technical Bulletin 82-T-27, part number 25056905 or 25056894.

Recall - Catalytic Converter Replacement|Page 1768 > < Dual Bed Catalyst - Change Procedures