405 L4-1905cc 1.9L (1989)
Antilock Brakes / Traction Control Systems: Service and Repair
Front Speed Sensors
Removal
1.
Remove retaining bolt, then remove speed sensor from vehicle.
2.
Check contact face cleanliness and clean if necessary. On a new sensor, remove plastic cap before installation.
3.
Check for free movement on support.
Installation
Fig. 2 Speed Sensor Adjustment
1.
Coat bolt (5) with Loctite and install, Fig. 2. Torque to 7 ft. lbs.
2.
Loosen bolt (6) and insert a 0.5mm feeler gauge between toothed ring and sensor head. Keep sensor just in contact with the feeler gauge, then
torque bolt (6) to 2 ft. lbs.