405 L4-1905cc 1.9L (1989)
Neutral Start Relay: All Technical Service Bulletins
Engine - Stalls When Moving Transmission Selector
BULLETIN NO. 305
DATE:
October, 1988
SUBJECT:
ENGINE STALLS WHEN MOVING AUTO TRANS SELECTOR AT IDLE
MODELS:
405 DL AND S VEHICLES EQUIPPED WITH AUTOMATIC TRANSMISSION
COMPLAINT:
We have experienced a few cases indicating that engine may stall intermittently at idle when gearshift is moved from park to reverse, or neutral to drive,
or neutral to reverse.
PARTS REQUIRED:
1 Diode type "Cartier" relay, P/N 6555.48
FIELD FIX:
-
Locate the park/neutral relay in the relay box on right hand side of engine compartment. Relay with wires 32A, 32B, 42, 45B.
Disconnect socket.
-
Reverse the socket wiring between pins 1 and 2.
To release the double lock terminal from the socket:
-
Push wire and terminal all the way up into socket.
-
Insert a small flat blade screwdriver, in center of terminal and pull wire down. Hold in this position, pull screwdriver out.
-
Insert screwdriver between rolled over side of terminal and side of socket; pull down on wire to release from socket.
-
Insert wires 32A and 32B instead of 45B into Pin 1
-
Insert wire 45B instead of 32A and 32B into Pin 2.
-
Install new park/neutral diode type relay, P/N 6555.48.
WARRANTY INFORMATION:
Damage Code:
655548
Operation Number:
990108
Time Allowance:
0025 hours
