505 L4-2155cc N9te (1986)
1.
Lightly lubricate brake shoe pressure pads on backplate.
2.
Transfer serviceable components to replacement brake shoes.
3.
Attach parking brake cable to lever.
4.
Install trailing shoe with new hold-down spring.
5.
Swing adjusting lever towards hub, then connect link rod to lever. Lower pawl and push lever downward.
6.
Install leading shoe with new hold-down spring.
7.
Install lower and upper return springs and secure to brake shoes.
8.
Install brake drum, wheel and tire assembly.
9.
Actuate brake pedal several times to set the automatic adjuster.
10.
Check master cylinder fluid level and replenish as necessary.
11.
Check brake pedal for proper feel and return.
12.
Lower vehicle and road test.