505 L4-2155cc N9te (1986)
3.
Loosen the exhaust center pipe clamps at the catalytic converter and the rear muffler.
4.
Loosen the exhaust center pipe bracket at E.
5.
Align the exhaust center pipe so that the clearance is split 1/3 at C, 2/3 at D. This will allow for the difference in engine torque under acceleration
versus engine "braking".
6.
Bend and align the heat shield as necessary to obtain sufficient clearance.
7.
Retighten all clamps and ROAD TEST TO VERIFY THE CORRECTNESS OF THIS REPAIR.
Warranty Information
1.
Reimburseable under normal warranty provisions
2.
Damage Code 172314
3.
Operation Number 018240
4.
Time Allowance 0050 Hours