505 L4-2155cc N9te (1986)
If changing I or II to type III, change both.
Apply a dab of "KLUBER PROBA ALTEMP" lubricant on contact faces of bushing and washer. (P.N. 9730.67).
NOTE:
During the first few miles of operation, the pulsation, shimmy, and noise level may increase noticeably until the abrasive brake pad fine
grinding action on the rotor is completed.
A 10 mile road test, applying the brakes several time is required prior to delivering the vehicle back to the owner.
WARRANTY INFORMATION:For Warranty Claim Preparation and Submission the following Damage Code, Main Operation Number, and Time
Allowance is to be used.
For vehicles that have new bushings and flat washers, see page 2 for VIN range, and require only brake pads, insulators,
and road test.
Damage Code:
424642
Main Operation Number:
082710
Time Allowance:
0075
For vehicles that require bushings, flatwashers, brake pads, and road test.
Damage Code:
424642
Main Operation Number:
082180
Time Allowance:
0175