505 V6-2849cc 2.8L ZN3J (1987)
Repair of Cause C:
-
Remove the two mounting nuts (8 mm hex head) on the right hand side of the injection ECU
Turn the ECU over and glue a piece of 5 mm (1/4 inch) thick approximately 25 x 30 mm (1 x 1 1/8 inches) medium density foam rubber, Neoprene
or similar, in the area indicated on the drawing below (use self-sticking material if available)
-
Reinstall the ECU
Reinstall lower glove box
WARRANTY INFORMATION: