plymouth Workshop Repair Guides

Plymouth Workshop Service and Repair Manuals

Ignition Hall Effect Sensor > < Diagram Information and Instructions|Page 1855
Page 1
background image

Powertrain Control Module: Service and Repair

Fig. 10 SMEC replacement

1988-89

1.

Remove air cleaner duct from SMEC.

2.

Disconnect battery ground cable.

3.

Disconnect 14-way and 60-way module electrical connectors, Fig. 10.

4.

Remove two module attaching screws, then the module.

5.

Reverse procedure to install.

Ignition Hall Effect Sensor > < Diagram Information and Instructions|Page 1855