Arrow/D50 Import L4-2000cc 2.0L (1982)
Axle Shaft: Service and Repair
Axle Assembly Removal and Installation
EXC. MODELS EQUIPPED WITH INDEPENDENT REAR SUSPENSION
1. Raise vehicle and support at frame. Support rear axle with a suitable jack.
2. Remove wheels and propeller shaft. Place matching mark on propeller shaft flange yoke and companion yoke for reassembly.
3. Disconnect brake hose from brake line.
4. Disconnect parking brake cable from both wheels and remove the parking brake cable lever on axle housing.
5. Remove shock absorbers.
6. Remove coil springs (if so equipped) or leaf springs as outlined.
7. If equipped with coil springs, remove lower control arm, assist link and upper control arm.
8. Remove rear axle assembly from vehicle.
9. Reverse procedure to install.
