Breeze L4-2.0L VIN C (1997)
Speed Sensor Cable Attachment To Rear Suspension
5. Remove speed sensor routing clips from the rear upper control arm and brake flex hose routing bracket.
Rear Speed Sensor Head Attachment To Brake Support Plate
6. Remove the rear speed sensor head from the rear brake support plate.
Installation
PROCEDURE
CAUTION: Proper installation of wheel speed sensor cables is critical to continued system operation. Be sure that cables are installed in retainers.
Failure to install cables in retainers as in this section may result in contact with moving parts and/or over extension of cables, resulting in an open circuit.
Rear Speed Sensor Head Attachment To Brake Support Plate
1. Install speed sensor head into brake support plate.
2. Install wheel speed sensor attaching bolt. Tighten the speed sensor head attaching bolt to 8 Nm (75 inch lbs.)
