Breeze L4-2.0L VIN C (1997)
Ignition Cable: Service and Repair
Replacement
Fig. 3 Spark Plug Cables
Clean high tension cables with a cloth moistened with a non-flammable solvent. Wipe the cables dry. Check for brittle or cracked insulation.
Resistance cables are identified by the words Electronic Suppression.
SPARK PLUG CABLE SERVICE
The cables insulate the spark plugs and covers the top of the spark plug tube Fig. 3. To remove the cables, lightly grasp the top of the cable. Rotate
the insulator 90° and pull straight up. To replace the cables, disconnect the cable from the ignition coil.
Ensure the #1 and #4 cables run under the #2 and #3 ignition coil towers. Keep #4 cable away from the oil fill cap.