Breeze L4-2.0L VIN C (1997)
Wheel Speed Sensor Connection To Vehicle Wiring Harness
1. Connect the wheel speed sensor cable connector to the vehicle wiring harness.
Speed Sensor Cable Routing Brackets
2. Install the speed sensor cable assembly grommet into the front inner fender. Install speed sensor cable grommet retainer/routing bracket on the
inner fender of the vehicle and install and securely tighten attaching bolt.
Correct Front Wheel Speed Sensor Cable Routing
CAUTION: When installing the wheel speed sensor cable routing bracket on the steering knuckle, the speed sensor cable must be looped toward
the shock absorber. If speed sensor cable is not routed in this direction it will rub against the tire or wheel, damaging the speed sensor cable.
3. Install the speed sensor cable routing bracket on the steering knuckle. Install and tighten routing bracket mounting bolt to a torque of 12 Nm (105
inch lbs.)
