Breeze L4-2.0L VIN C (1997)
10. Loosely install the 2 shock absorber clevis to lower control arm attaching nuts and bolts.
11. Install tie rod seal boot heat shield on tie rod end.
12. Install tie rod end into steering knuckle. Start tie rod end to steering knuckle attaching nut onto stud of tie rod end. While holding stud of tie rod end
stationary, tighten tie rod end to steering knuckle attaching nut. Then using a crowfoot and 11/32 socket, torque tie rod end attaching nut to 61 Nm
(45 ft. lbs.).
