Breeze L4-2.0L VIN C (1997)
Fig. 51
4. Install the jounce bumper as shown on the rod of the shock absorber assembly.
5. Install the sleeve on the rod of the shock absorber assembly with the undercut side of sleeve facing down. Push sleeve down until seated on the step
of the shock absorber rod.
WARNING: If a replacement coil spring is to be installed on the strut assembly, the first full top and bottom coil of the spring must be
captured by the jaws of the coil spring compressor.
6. Install the coil spring and spring compressor (with small diameter coils down) on the shock absorber assembly. Be sure bottom coil of spring is
correctly positioned on the lower spring isolator.