Breeze L4-2.0L VIN C (1997)
Shift Cable: Service and Repair
REMOVAL
1. Disconnect battery negative cable at shock tower.
2. Remove air cleaner assembly.
3. Disconnect gear shift cable ends from transaxle shift levers.
CAUTION: Pry up with equal force on both sides of shifter cable isolator bushings to avoid damaging cable isolator bushings.
4. Remove cable to bracket retaining clips at transaxle.
CAUTION: It is recommended that new cable retaining clips be used for reinstallation.
5. Pull cables up out of transaxle bracket.
6. Remove gearshift knob and boot.
7. Remove console front screws. Remove console rear screws.
