plymouth Workshop Repair Guides

Plymouth Workshop Service and Repair Manuals

Procedures|Page 5338 > < Procedures|Page 5336
Page 2
background image

2. Push downward at ends of sill plate to engage retainers attaching sill plate to door opening flange.

Front

FRONT DOOR TRIM PANEL

REMOVAL

1. Disconnect battery
2. Open door.
3. Disconnect main wiring harness at door opening.

Fig. 20 Window Crank Removal Tool

4. If equipped, remove window crank.

Fig. 28 Front Door Trim Panel

5. Disengage clips attaching speaker grille to trim panel.
6. Remove screws attaching door trim panel to door from around speaker opening.
7. Remove screw cap from bottom of arm rest pull cup.
8. Remove screw attaching arm rest pull cup to support bracket behind trim panel.
9. Remove screw cap from behind inside door latch handle.

10. Remove screw attaching door latch handle to door panel.
11. Disengage clips holding trim panel to perimeter of door.
12. Lift trim panel upward to disengage upper retainer channel.
13. Tilt top of trim panel away from door.

Procedures|Page 5338 > < Procedures|Page 5336