Breeze L4-2.4L VIN X (2000)
1. Attach a clear plastic hose to the bleeder screw and feed the hose into a clear jar containing enough fresh brake fluid to submerge the end of the
hose.
2. Open the bleeder screw at least one full turn or more to obtain a steady stream of brake fluid.
3. After approximately 4-8 ounces of fluid have been bled through the brake circuit and an air-free flow is maintained in the clear plastic hose and
jar, close the bleeder screw.
4. Repeat this procedure at all the remaining bleeder screws.
5. Check the brake pedal travel. If pedal travel is excessive or has not been improved, some air may still be trapped in the system. Rebleed the brakes
as necessary.
6. Test drive the vehicle to verify the brakes are operating properly and pedal feel is correct.