Breeze L4-2.4L VIN X (2000)
Installing Piston Into Caliper Bore
4. Install piston into caliper bore pushing it past the piston seal until it bottoms in the caliper bore.
5. Position the dust boot into the counterbore of the caliper assembly piston bore.
6. Using a hammer and Installer, Special Tool C-4689, and Handle, Special Tool C-4171, drive the boot into the counterbore of the caliper.
7. Install the brake shoes.
8. Reinstall the caliper on the vehicle and bleed the brakes as necessary. Follow the installation procedure found in Removal and Installation.