Breeze L4-2.4L VIN X (2000)
Manifold Absolute Pressure (MAP) Sensor: Service and Repair
Manifold Absolute Pressure (MAP) Sensor Replacement
IAT Sensor And MAP Sensor
The MAP sensor attaches to the intake manifold plenum.
REMOVAL
1. Remove the negative battery cable.
2. Disconnect electrical connector from MAP sensor.
3. Remove sensor mounting screws.
4. Remove sensor.
INSTALLATION
1. Insert sensor into intake manifold while making sure not to damage O-ring seal.
2. Tighten mounting screws to 3.4 Nm (30 in. lbs) torque.
3. Attach electrical connector to sensor.
4. Install the negative battery cable.