Breeze L4-2.4L VIN X (2000)
Wheel Fastener: Service and Repair
CAUTION: If a wheel mounting stud needs to be replaced in the hub and bearing assembly, DO NOT hammer the studs out of the hub flange. If a stud
is removed by hammering it out of the bearing flange, damage to the hub and bearing assembly will occur leading to premature bearing failure.
REMOVAL
1. Raise vehicle on jackstands or centered on a frame contact type hoist.
2. Remove the front wheel and tire assembly from the vehicle.
Fig. 57
3. Remove front disc brake caliper to steering knuckle attaching bolts.
Fig. 58
4. Remove disc brake caliper assembly from steering knuckle. Caliper is removed by first lifting bottom of caliper away from steering knuckle, and
then removing top of caliper out from under steering knuckle.
