Breeze L4-2.4L VIN X (2000)
Power Window Switch: Testing and Inspection
Master Window Switch Continuity Test
Passenger Window Switch Continuity Test
For switch testing, remove the switch from its mounting, refer to Switch Removal. Using an ohmmeter, refer to Window Switch Continuity Charts to
determine if continuity is correct. If the results are not obtained, replace the switch.
The master window switch has an Auto-Down feature. Actuation of the master switch to the second down position will move the drivers side window
completely down. The electronic switch will automatically disconnect the motor approximately 1 second after the window bottoms out. Failure of the
electronic switch to detect stall current, will cause the switch to disconnect after approximately 13 seconds. The auto down function can be canceled by
any movement of that switch.