Breeze L4-2.4L VIN X (2000)
The intermittent wiper system, in addition to low and high speed, has a delay mode. The delay mode has a range of 1/2 to 18 seconds when the vehicle
speed is over 10 mph. The wiper delay times will automatically double to a range of 1 to 36 seconds when the vehicle speed is less than 10 mph. The
delay is controlled by a variable resistor in the wiper switch and BCM.
The wiper motor and washer motor are designed to reduce radio frequency interference and provide electro-magnetic compatibility (RFI/EMC) in the
vehicle environment. This is done with suppression circuits designed into the motors.
The wiper system completes the wipe cycle when the switch is turned OFF. The blades park in the lowest portion of the wipe pattern.
