plymouth Workshop Repair Guides

Plymouth Workshop Service and Repair Manuals

Engine - Hard Start/Rough Idle|Page 3883 > < Engine - Hard Start/Rough Idle|Page 3881
Page 1
background image

A/C Heater Control: Adjustments

Fig. 1 Removing or installing self-adjust clip

    Position self-adjusting clip on cable core wire 2 inches from loop at heater evaporator cable end. Pry clip into locked position using 1/4 inch tube. 

Fig. 2 Control cable connection at door crank

Align door crank pin with clip and seat cable flag. 

Engine - Hard Start/Rough Idle|Page 3883 > < Engine - Hard Start/Rough Idle|Page 3881