plymouth Workshop Repair Guides

Plymouth Workshop Service and Repair Manuals

EVAP Canister - Fuel Vapor Odors|Page 2364 > < EVAP Canister - Fuel Vapor Odors|Page 2358
Page 1
background image

Evaporative Emission Control Canister: All Technical Service Bulletins
EVAP Canister - Fuel Vapor Odors

Models

All 1985 Vehicles Equipped With 2.2L Turbocharged Engines

Subject

Fuel Vapor Odors

Index

FUEL

Date

April 28, 1986

No.

14-02-86

P-1536C
SYMPTOM/CONDITION

Fuel vapor odors originating from the canister.

PARTS REQUIRED

Fuel Vapor Kit PN 4419408

Contains the following:

1

Connector (black)

PN 4179981

1

Hose Routing Label

PN 4179835

1

Authorized Modification Label

PN 4275086

REPAIR PROCEDURE

This procedure is to remove the vapor conister purge orifice.

1.

After insuring that the entire purge system is functional per the Driveability Test Procedure (unrestricted vacuum lines, operational purge solenoid,
etc.), locate the 5/16" I.D. hose leading from the top center of the vapor canister to the ported vacuum fitting on the throttle body. This line is
directly under the 1/8" vacuum line from the purge solenoid at the canister.

2.

Find the brown in-line plastic connector, PN 4300907 (which contains a .040" restrictor), located 3" from the canister in the 5/16" I.D. line.
Replace this brown connector with the black connector, PN 4179981 (unrestricted).

NOTE:

THIS BLACK CONNECTOR WAS INSTALLED AS A PRODUCTION RUNNING CHANGE FOR ALL 1985 2.2L
TURBOCHARGED ENGINES.  SINCE INCORPORATION DATES VARY DUE TO PLANT AND VEHICLE COMPLEXITY,
BE SURE THAT VEHICLE CONTAINS THE BROWN CONNECTOR BEFORE REPLACING.

3.

Clean existing hose routing label and attach new hose routing label, PN 4179835, over original label.

EVAP Canister - Fuel Vapor Odors|Page 2364 > < EVAP Canister - Fuel Vapor Odors|Page 2358