Caravelle L4-135 2.2L SOHC (1985)
3.
Remove trim panel.
4.
Disconnect feed wire connector from motor.
5.
Remove 4 screws securing motor bracket and remove motor assembly from liftgate.
INSTALLATION
Trim Ring And Sealing Washer (K/P, D, C)
1.
Install flat steel washer over drive shaft.
2.
Install new sealing washer over drive shaft.
3.
Position motor in liftgate and secure with 4 screws.
4.
Connect feed wires to motor and install trim panel.
5.
Install and adjust arm and blade assembly.
Models L/M, Z
REMOVAL
Removing Wiper Motor Cover
1.
Open liftgate.
2.
Remove plastic wiper motor cover.
Pivot Shaft Nut (L/M, Z)
3.
Remove arm assembly.
4.
Remove nut, ring and seal assembly from pivot shaft.