plymouth Workshop Repair Guides

Plymouth Workshop Service and Repair Manuals

ECM - Cold Sag/Hesitation On Shifting|Page 1419 > < ECM - Cold Sag/Hesitation On Shifting|Page 1413
Page 1
background image

Powertrain Control Module: Customer Interest
ECM - Cold Sag/Hesitation On Shifting

Models

1985 Colt With 1.6 Liter Turbocharged Engine

Subject

Cold Sag and/or Hesitation on Shifting

Index

DRIVEABILITY

Date

February 3, 1986

No.

18-16-86

P-241-C
SYMPTOM/CONDITION

Subject model vehicle may exhibit a cold sag and/or a cold hesitation immediately after shifting gears. The condition will be most noticeable with a cold
engine, in cold ambients, during wide open throttle acceleration.

PARTS REQUIRED

Modulator Kit PN MD102147

Consists of:

1 Modulator

PN MD102148

1 Wiring Harness

PN MD102149

Must be ordered separately:

1 Authorized Modification Label

PN 4275086

REPAIR PROCEDURE

This repair consists of installing a modulator on top of the ECI unit.

1.

Remove the black plastic ECI cover from under the heater housing.

2.

Remove the ECI unit and its mounting bracket as an assembly by removing the bracket from the heater housing.

3.

Disconnect the wiring harness from the ECI unit and the ground wire from the mounting bracket.

4.

Attach wiring harness, PN MD102149, to both the ECI and the modulator, PN MD102148.

ECM - Cold Sag/Hesitation On Shifting|Page 1419 > < ECM - Cold Sag/Hesitation On Shifting|Page 1413