plymouth Workshop Repair Guides

Plymouth Workshop Service and Repair Manuals

Suspension Strut / Shock Absorber > < Front Sway Bar - Squeak/Squawk Noises|Page 2705
Page 1
background image

Suspension Spring ( Coil / Leaf ): Service and Repair

Fig. 9 Coil spring rear suspension. Colt & Colt Vista w/2 wheel drive, exc. 1988 Colt

COLT & COLT VISTA W/2 WHEEL DRIVE, EXC. 1988 COLT WAGON

1. Raise rear of vehicle and position jackstands under frame side rails to support body.
2. Remove wheel and tire assembly, then remove rear drum brake assembly.
3. Disconnect muffler from exhaust pipe, then remove muffler assembly.
4. Position a suitable jack under suspension arm, then raise suspension arm slightly.
5. Disconnect shock absorber from upper and lower mounting.
6. Carefully lower jack to relieve spring tension, then remove coil spring. When removing spring, note location of upper and lower spring seats.
7. Reverse procedure to install. After completing installation, bleed brake system and adjust rear wheel bearings.

Suspension Strut / Shock Absorber > < Front Sway Bar - Squeak/Squawk Noises|Page 2705