Colt L4-1753cc 1.8L SOHC (1989)
9.
Switch the ohmmeter leads to the positive lead connected to terminal 8 and the negative lead to terminal 6.
Continuity should exist.
10.
Check for continuity between the relay terminals 2 and 4.
Continuity should NOT exist.
Checking Coil L3
11.
Energize the relay by connecting a lead wire with alligator clips from the negative terminal of the battery to terminal 6 of the relay, and a lead
wire with alligator clips from the positive terminal of the battery to terminal 8 of the relay.
12.
Check for continuity between the relay terminals 2 and 4.
Continuity should exist, with no resistance.
Remove the power source connections from the Control Relay.
If the test results are other than specified, replace the Control Relay.