Colt Vista 2WD L4-1795cc 1.8L SOHC (1992)
Axle Shaft: Service and Repair
Rear Halfshaft Replacement
1. Raise and support vehicle.
2. Use spanner wrench tool No. MB990767 or equivalent to lock hub while removing driveshaft retaining nut.
CAUTION: Do not apply vehicle weight to wheel bearing while loosening shaft nut. If vehicle is to be moved after removal of driveshaft, install
bolt tool No. MB990998 or equivalent to support bearing.
3. Remove companion flange to differential carrier bolts. Support driveshaft and press driveshaft out of rear axle hub using rear axle puller and
spanner wrench tool Nos. MB990241 and MB990767 or equivalents.
4. Inspect driveshaft boots for damage or deterioration.
5. Reverse procedure to install torquing companion flange bolts to 40-47 lb-ft, and driveshaft nut to 145-188 lb-ft.
