Colt Vista 2WD L4-1997cc 2.0L SOHC (1984)
will be automatically adjusted by tensile strength of tensioner spring.
CAUTION: The purpose of pushing tensioner with screwdriver is to loosen tensioner mounting surface which might have stuck due to many
hours of being tightened
8. First tighten tensioner mounting bolt (bottom side) with wrench and then tighten mounting nut (top side).
CAUTION: Make sure that bolt (bottom side) is tightened first. If nut is tightened first, belt tension will vary (will become too tight).
Mounting Access Cover
9. Mount two access covers to respective adjusting holes. Access cover can be easily mounted by sliding in such a way that hook will pass between
guide projections.
10. Install timing belt front upper cover.