Colt Vista 4WD L4-1997cc 2.0L SOHC (1985)
2.
Confirm that the vacuum delay valve of the harness is connected to the EGR valve and that the other port of the 3-way vacuum connector is c
3.
Verify that the vacuum harness is routed around the carburetor and the F-connector of the harness is teed into the vacuum hose connecting the
4.
Ensure that the harness is tie-wrapped to the carburetor water hose to prevent interference with the carburetor linkage.
5.
Continue with Section H.
G. Vacuum Hose Harness Installation (If Necessary)
G.
Vacuum Hose Harness Installation (if necessary)