Colt Vista 4WD L4-1997cc 2.0L SOHC (1985)
3.
Locate and cut the vacuum hose from the carburetor base to the Depression Chamber (Figure 13).
4.
Route the harness around the carburetor and insert the harness F-connector into the cut ends of the hose (Figure 14).
5.
To prevent interference with the carburetor linkage, secure the harness to the carburetor water hose using the shorter supplied tie wrap.
G. Adjust Idle Speed and Basic Timing
1.
Start the engine and warm it to normal operating temperature.
2.
Run the engine for at least five seconds between 2000 and 3000 RPM.