plymouth Workshop Repair Guides

Plymouth Workshop Service and Repair Manuals

Recall - Excessive CO & HC Emission & Exhaust Leak|Page 1824 > < Recall - Excessive CO & HC Emission & Exhaust Leak
Page 2
background image

The emissions service package and components are as follows:

B.

Exhaust Manifold Parts Packages are being shipped at dealer cost to all involved dealers for replacement of leaking manifolds as necessary.
Each dealer with involved vehicles will receive enough manifold parts packages to service 10% of those vehicles.

The manifold parts packages and components are as follows:

Owner Notification and Service Scheduling

All involved vehicle owners known to Chrysler are being notified of the service requirement by first class mail. They are requested to schedule
appointments for the service with their dealers at the earliest possible date. A copy of the owner notification letter is attached.

Enclosed with each owner notification is an Owner Recall Notification Form # 83-295-0019. The involved vehicle and recall are identified on the form
for owner or dealer reference as needed.

A.Clean Choke Shaft and Replace Primary Air Bleed Jet

1.

Drain about one gallon of engine coolant from the radiator and save for later use.

2.

Remove air cleaner assembly and plug the vacuum line.

3.

Remove throttle return spring.

4.

Remove the carburetor following Service Manual procedures.

5.

Clean the outside of the carburetor. Check the choke for smooth operation and inspect the Secondary Air Bleed Jet for any dirt.

Recall - Excessive CO & HC Emission & Exhaust Leak|Page 1824 > < Recall - Excessive CO & HC Emission & Exhaust Leak