Colt Vista 4WD L4-1997cc 2.0L SOHC (1985)
Figure 3
1.
Insert the fast idle release tool (PN C3940272) between the fast idle cam lever and the wax element housing (Figure 3).
NOTE:
Insert the tool so that there is no interference with the throttle lever movement.
2.
Turn tool counterclockwise (about 45 degrees) until the tool is wedged in the position. This provides the needed clearance between the
choke adjusting screw and the plunger.
NOTE:
Rotate the throttle lever to a fully open position for easier shim installation.
Figure 5
3.
Using the installation stick attached to the choke shim, install the shim on the choke adjusting screw (Figure 5).
4.
Rotate the fast idle release tool clockwise and remove.
5.
Detach the installation stick from the shim by twisting the stick until it breaks free from the shim.
6.
Insure that the choke adjusting shim is securely installed between the plunger and the adjusting screw.
C.Adjust Fast Idle Speed
