Colt Vista AWD Heater Core Service and Repair
Fig. 21 Positioning Air Selection Damper Lever
8. Reverse procedure to install, noting the following:
a. Place mode selector lever in defrost/vent position, then with mode selection damper lever pressed inward in direction indicated by arrow
connect mode selection control wire to lever and secure outer cable using clip.
b. Place temperature control lever in "COOL" position, then with water valve control lever pressed inward in direction indicated by arrow
connect temperature control wire to lever and secure outer cable using clip.
c. Place air selection lever in recirculation position, then with air selection damper lever pressed inward in direction indicated by arrow connect
air selection control wire to lever and secure outer cable using clip.