plymouth Workshop Repair Guides

Plymouth Workshop Service and Repair Manuals

Exhaust Gas Recirculation > < Evaporative Emission Control Canister|Locations
Page 1
background image

Evaporative Emission Control Canister: Description and Operation

Charcoal Canister, Typical

PURPOSE

To trap and reclaim fuel vapor that would normally escape into the atmosphere, due to expansion within the fuel system.

LOCATION

The charcoal canister is located in the engine compartment

CONSTRUCTION

It is filled with activated charcoal granules, which will hold up to one-third their own weight in fuel vapors.

OPERATION

The canister is connected to the fuel tank by a vent line. Within the vent line is a two-way check valve which opens to allow excess fuel tank
pressure and vapors into the canister for storage, until the engine is started. During the canister purge cycle fresh air is drawn through the filter at
the bottom of the canister, purging the charcoal of fuel vapors.

Activated charcoal is used as a vapor trap because of its great surface area. Each gram of activated charcoal has a surface area of 1,100 square
meters, or more than a quarter acre.

Exhaust Gas Recirculation > < Evaporative Emission Control Canister|Locations