plymouth Workshop Repair Guides

Plymouth Workshop Service and Repair Manuals

Steering|Tie Rod > < Steering Gear|Removal and Installation|Page 3480
Page 1
background image

Steering Wheel: Service and Repair

1. Disconnect battery ground cable.
2. Remove steering wheel horn pad, then remove steering wheel to column shaft attaching nut.
3. Using a suitable puller, remove steering wheel.
4. Reverse procedure to install. Torque steering wheel to column shaft attaching nut to 25-33 lb-ft.

Steering|Tie Rod > < Steering Gear|Removal and Installation|Page 3480